Flashtools

How to Flash Stock Rom using Smart Phone Flash Tool

These are the instructions to Flash Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on Windows Computer.

Requirements: Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

Also read :- Sony Xperia E4g Dual Firmware E2033 & E2043 or Sony Xperia E4 Firmware E2104, E2105

Flash Stock Rom using Smart Phone Flash Tool (SP Flash Tool)

Step 1Download and install Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files:

smartphone flashtool guide

Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in Step#4).

sp flashtool 01

Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.

sp flashtool 02 tutorial

 

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock rom folder).

sp flashtool 04 tutorial

Step 9: Now, Click on the Download Button to begin the Flashing Process.

sp flashtool 05 tutorial

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

sp flashtool success

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Hurray, By completing the above steps successfully you will be running the Stock Rom on your Android Phone.Downloaded.

Important notes:

[*] The above tutorial only works with the Stock firmware or Custom Rom which comes with the Scatter file in it (basically mediatek devices).

 

[*] Backup Please: Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed permanently.

 

[*] How to Flash IMEI: After flashing the firmware on your Mediatek Device, you need to follow How to Flash IMEI using SN Write Tool to fix the IMEI on your device.

Related threads

Join The Discussion

%d bloggers like this: