Download and install stock rom / firmware for Tecno Spark Plus K9. Official stock ROM and flash file now available for Tecno Spark Plus K9, in this article you can download latest firmware file For Tecno Spark Plus K9. You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development. The Tecno Spark Plus K9 is Run on Android 7.XX OS Powered by Mediatek Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.
Also read :
- Download Honor 9 B180 Nougat Firmware
- Download Huawei P10 B159 Nougat Update
- Download Oxygen OS 5.0 for Oneplus 3 and 3T
Tecno Spark Plus K9 features wide angle display size of 6.0 inches, it has a resolution of 720 by 1280 pixels which is quite unimpressive for a smartphone of that screen size. Under the hood is a 16 GB internal storage space and 2 GB RAM to to give you a lag-free phone usage. The RAM is supported by a Mediatek chipset and 1.3 GHz Quad-core processor. Note: the Tecno K7 has 1GB RAM and a 1.3 GHz processor.
Flashing The official Stock Rom/ firmware on Tecno Spark Plus K9 will Erase all your Personal data and you will be back on stock system. So Create a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on Tecno Spark Plus K9.
- This ROM/Recovery is work on Tecno Spark Plus K9 only. Don’t try this on any other device.
- Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
- It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
- Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
- Unkilled 0.8.1 Apk Mod + Data (Unlimited Ammo) – Mali, PowerVR, Tegra, Adreno
- Minecraft 1.0.5 APK Mod – Pocket Edition Download
- Nitro Nation APK 5.2 Mod Free Download
Downloads for Tecno Spark Plus K9
|SP Flash tools||Download|
Install Tecno Spark Plus K9 Firmware
- Step 1 – Download SP flash tool from above link and extract in a folder. (you may extract on Desktop For Better navigation)
- Step 2 – Install appropriate adb and Vcom driver in your PC from above link. (wrong driver installation cause failure)
- Step 3 – Download (Tools, Rom, Recovery) from above link for your device and extract in a folder.
- Step 4 – Go to extracted Sp tools folder and run sp flashtools.exe file.
- Step 5 – In SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.
- Step 6 – Select what you want flash Select Whole Rom (for flashing custom recovery, check recovery only)
- Step 7 – Remove battery of your phone and click on download button and immediately connect your smartphone into using usb. (if not detect then insert battery and connect, if the battery is non removable switch off phone and try connect)
- Step 8 – Wait until flashing is complete it may take a few minutes to flashing. After the success confirmation insert battery and you are done now switch on your smartphone.