Root Tecno Spark Plus K9

How to Install TWRP Recovery and Root Tecno Spark Plus K9

Install TWRP Recovery and root Tecno Spark Plus K9. In this article, we wrote a guide on how to Root Tecno Spark Plus K9 using the SuperSU. This is a Latest twrp 3.x Recovery for Tecno Spark Plus K9 which is flashable with the SP flash tool, Rooting May void your Device warranty So must create a backup before doing anything, after that you have full right to play with your phone, you can tweak it using custom ROM and kernel, Follow below Guide to Root Tecno Spark Plus K9.

Also read :

Notes :
  • This ROM/Recovery is work on Tecno Spark Plus K9 only. Don’t try this on any other device.
  • This is the stable version of Rom/Recovery.
  • Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  • It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  • Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.

Downloads for Tecno Spark Plus K9

Trending :

How to Install twrp Recovery on Tecno Spark Plus K9

  • Step 1. Download SP flash tool from the above link and extract in a folder. (you may extract on Desktop For Better navigation)
  • Step 2. Install appropriate ADB and Vcom driver in your PC from the above link. (wrong driver installation cause failure)
  • Step 3. Download (Tools, Rom, Recovery) from the above link for your device and extract in a folder.
  • Step 4. Go to extracted Sp tools folder and run sp flashtools.exe file.
  • Step 5. In SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.
  • Step 6 Select what you want flash Select Whole Rom (for flashing a custom recovery, check recovery only)
  • Step 7. Remove the battery of your phone and click on the download button and immediately connect your smartphone into using USB. (if not detect then insert the battery and connect, if the battery is non-removable switch off the phone and try to connect)
  • Step 8. Wait until flashing is complete it may take a few minutes to flash. After the success confirmation insert battery and you are done now switch on your smartphone.


  • Use Fastboot code – fastboot flash recovery recovery.img
  • or use S-Droid Toolkit

How to Root Tecno Spark Plus K9

  1. Download Superuser From above and Save it to Device storage,
  2. Reboot Device into TWRP Recovery, use power and volume + button or CMD: ADB reboot recovery
  3. On Recovery Create a Nandroid Backup and then Do a Factory Reset,
  4. Click on Install Zip from SD card, Locate Downloaded magisk/
  5. Confirm Install wait For Success Done, reboot system Now

So this is the complete guide to Install TWRP Recovery and Root Tecno Spark Plus K9, if you have any queries let me know via comments, Please like our facebook or twitter pages for more similar or future updates.

Related threads:

Leave a Reply

Your email address will not be published. Required fields are marked *