J3 Pro Firmware

Samsung Galaxy J3 Pro Firmware J330F

Samsung Galaxy J3 Pro Firmware Download. In this post, we have managed to share the stock ROM for Samsung Galaxy J3 Pro smartphone. You will be able to download firmware using the links provided below and also the guide for flashing firmware to your Samsung Galaxy J3 Pro.

Also read: Sony Xperia E4g Dual Firmware E2033 & E2043

We use a tool called ‘Odin’ for flashing firmware to Samsung Galaxy devices. The Odin tool was officially developed by Samsung Labs and now it’s available to every developer and we can also use this tool for officially flashing Samsung ROM. Download Galaxy J3 Pro firmware from below and flash using Odin. Install Samsung Galaxy J3 Pro Firmware below.

Samsung Galaxy J3 Pro smartphone released in 2016, June with 142.2 x 71.3 x 8 mm dimensions. It features Dual sim, Front glass, and Aluminum body. The display for Samsung Galaxy J3 Pro smartphone is 5.0 inches with a resolution of 720 x 1280 pixels. The phone runs on Android 5.1 Lollipop powering Qualcomm MSM8916 Snapdragon 410 chipset and Quad-core 1.2 GHz Cortex-A53 processor. The device powered with Removable Li-Ion 2600 mAh battery which weighs around 139 g approx.


From below, you can download the stock firmware for your device. Please make sure that you are downloading the correct build for your phone. You can either seek help from us or google.

[su_note note_color=”#ffa473″ text_color=”#ffffff” radius=”5″]Check your device model number from Settings > About device, then download the specific firmware for your device.[/su_note]


Samsung Galaxy J330F Firmware

Android 8.1 – SM-J330F_J330FXXU3BRL2_J330FOXY3BRL2_SER_8.0_5Files.rar / Mirror


How to Flash Firmware on Samsung Galaxy J3 Pro

[su_highlight background=”#eaeaea”]

  • Download and extract Odin v3.13.1 ZIP file
  • Open Odin v3.13.1 software
  • Reboot the device in Download Mode (press and hold Home + Power + Volume Down)
  • Connect device and wait for “ID: COM” to turn blue in Odin
  • Add the downloaded firmware file to AP/DPA
  • Make sure “Re-Partition” is NOT ticked
  • Click the “Start” button to begin the installation process
  • For detailed instructions and troubleshooting, click here


Related threads:

Leave a Reply

Your email address will not be published. Required fields are marked *