Download and Install LG Q6 Firmware M700A, M700DSK, M700AN

Download and Install LG Q6 Firmware M700A, M700DSK, M700AN

Download and Install LG Q6 Firmware (M700A, M700DSK, M700AN). LG Q6 smartphone was launched in July 2017. The phone comes with a 5.50-inch touchscreen display with a resolution of 1080 pixels by 2160 pixels at a PPI of 442 pixels per inch. The LG Q6 runs Android 7.1.1 and is powered by a 3000mAh non-removable battery. It measures 142.50 x 69.30 x 8.10 (height x width x thickness) and weigh 149.00 grams.

Versions:

  • M700N (Europe, Single SIM);
  • M700A (Europe, Dual SIM);
  • M700DSK (Asia);
  • M700AN (Kazakhstan)

See all the benefits for installing Firmware of your phone

Flashing stock firmware’s or custom ROM to LG phones is a little bit confusing, but we will provide each and every step for installing the firmware to your LG phones. All you need is your phone’s firmware file (.KDZ or TOT file) and the popular FlashTool. From here you can Install LG Q6 Firmware.

Also :- Minecraft 1.0.5 APK Mod – Pocket Edition Download or Nitro Nation APK 5.2 Mod Free Download

Custom ROM

If you want to try another custom ROM’s in your device you can download the available ROM or recoveries for your LG Q6 Firmware and flash it using guides provided in this website. In order to install any ROM other than stock, you have to root your phone and then need to flash custom recoveries like CWM (clockwork mode) or TWRP on your phone.

Download and Install LG Q6 Firmware M700A, M700DSK, M700AN

Note: If you find any new stock roms that you want added to this list please comment below or contact me.

Also ReadDisable Driver Signature Verification In Windows 8, 8.1 & 10 for Installing Drivers

LG Q6 Firmware M700A, M700DSK, M700AN

From below, you can download the latest firmware for your phone. Please make sure that you are downloading the correct build for your phone. You can either seek help from us or from google.

Check your device model number from Settings > About device, then download the specific ROM for your device.

M700 (Q6a)

Android Version – 8.0 | Size – 2.59 GB

M70020b_00_OPEN_CIS_DS_OP_0917.kdz


M700A (Dual)

Android 8.0 Nougat for LG Q6 Firmware [M700A]

Android Version – 8.0 | Size – 2.20 GB

M700A20e_00_OPEN_EU_DS_OP_0313.kdz


M700DSK

Android 8.x Nougat for LG Q6 Firmware M700DSK

Android Version – 8.x | Size – 2.3 GB

M700DSK20a_00_OPEN_ESA_DS_OP_0824.kdz


How to Install Firmware file (.kdz)

Method 1

Using Flashtool 2014

Download and setup LG Driver : Download_LG_Drivers

+ Download LG Flash Tool 2014 tool and extract: Download_FlashTool_2014.zip
+ Enter to Download Mode and plug USB into your PC
+ WARNING: Remember copy KDZ file into LG Flash Tool 2014 folder
+ Run LGFlashTool2014.exe and do as following pictures :
+ If you cannot run LGFlashTool2014.exe, please install: Visual C++ Runtime Library | Mirror  

Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differs from current ROM on your phone or MOD ROM.

CSE Flash: Choose this option when you need a fresh format. All data will be gone. It’s suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.


Method 2

Using LG UP Tool

Requirements

Flashing Guide

  •  First of All, Install the DLL file, then install LGUP Software on your Computer.
  •  Run LGUP tool on your Computer.
  •  Connect your LG X Venture Device to your PC/Computer.
  •  LG X Venture (LGM710DS) will be listed on the screen of LGUP tool.
  •  Now Hit on the Upgrade option in LGUP and select the file’s path. Locate the KDZ file (M710ds10c_00_OPEN_CIS_DS_OP_0818.kdz) & select it.
  •  Click Start button and the installation process will be started.
  •  Once the flashing process is completed, your device will restart.
  •  Unplug your phone, Done!!!
  •  You have successfully Installed the Official Firmware on your LG Phone.

Method 3

Using LG Flashtool

  1. Unpack RAR, and  Install both LG Flash Tool & LG Mobile, Drivers
  2. Take megalock.dll (From Here) and drop it in the flash tool directory [C:\LG\LGFlashTool] overwriting the file inside.
  3. Launch the program [First Time It Makes You Select A Mode Pick The Third] and click manually select dll.
  4. Select the dll included.
  5. Select the .kdz or .tot file included.
  6. At the bottom click Board DL, then click ok.
  7. Turn phone all the way off. Plug the USB cord into the phone, then into the computer as soon as you plug it in press Volume Up.
  8. Go to device manager [PC Application] and under com ports select the new LG device and double click.
  9. Click the tab Port Settings, click advanced. Click COM Port and set the port to 41. If already in use say ok anyway.
  10. In LG flash tool click the arrow in the top left corner to run the md5 check.
  11. It will finish and say ready. Hold the power button till black screen then hold Volume Up.
  12. After a few seconds, it will start flashing the device.
  13. When booting into Mini OS you’ll notice it is a menu. All you have to do is hold power and click Normal Boot then OK.

Method 4

Using SP Flashtool – Smart Phone Flashtool – [Mediatek Only]

Readme Once:

[*] How to Use: If you wish you can learn to use SP Flash Tool by following the step-by-step Guidelines on How to Use SP Flash Tool.


[*] Download Android CDC Driver
: SP Flash Tool is best compatible with Android CDC Driver. If you want to use SP Flash Tool correctly then Download and Install Android CDC Driver on your Windows Computer.


[*] Download Android VCOM Driver
: If Android CDC Driver didnt work for you then try Android VCOM Driver which also supports all the Mediatek Devices.


[*] Download Android Stock Firmware
: You need a Mediatek device to flash rom using SP Flashtool.

FINISHED !

NB : First boot may take a while so be patient and let it boot.

You have just installed stock firmware! Now disconnect your LG device and power on the handset.

It will take some time for the first boot so, don’t worry if it takes a while, this is to be expected.

Hurray!

NB : First boot may take a while so be patient and let it boot.

You have just installed stock firmware! Now disconnect your LG device and power on the handset.

It will take some time for the first boot so, don’t worry if it takes a while, this is to be expected.


Firmware Benefits

You can use the firmware for variety of purposes, which includes:

  • Fix your LG Q6 firmware if it’s giving you force closes errors and restarts randomly.
  • Unbrick your LG Q6 Firmware if it’s boot looping and stuck at logo when restarting.
  • Go Back to Stock on yourLG Q6 — helps when looking to sell the device, or fix installing OTA updates if broken.
  • Restore LG Q6 to factory state i.e original state when you bought.
  • Upgrade your LG Q6 Firmware to newer Android version.
  • Downgrade your LG Q6 to lower build no. at same Android version.
  • Unroot your LG Q6.
  • Remove custom recovery like TWRP and CWM, if installed.

To perform any of the above, simply install the firmware meant for your device, as per its model no. in Settings > About device.

Need help? Let us know if you need any help regarding this via comments below.

Other ROM

Tags – LG Q6 Firmware, LG Q6 Stock Rom Download, LG Q6 USB Drivers, LG Q6 Flashtool, LG Q6 Custom ROM,LG Q6 Nougat, LG Q6 Custom Recoveries, LG Q6 CWM Recovery, LG Q6 TWRP Recovery.

Leave a comment