How To Root Moto G6 and Install TWRP

How To Root Moto G6 and Install TWRP

Lenovo possessed Motorola propelled the Moto G6 at an occasion in Brazil on April 20, 2018, however, it, in the end, advanced toward India on June 4, 2018. The telephone sports a 5.7 inch Full HD+ IPS LCD show and is fueled by the Qualcomm Snapdragon 450 timed at 1.8 GHz and it accompanies 3 or 4 GB of RAM. Inward capacity is at 32 or 64 GB which can be additionally extended up to 128 GB using a small scale SD card. In the camera division, the Moto G6 packs a 12-megapixel (f/1.8, 1.4 microns) essential sensor and a 5-megapixel (f/2.2) profundity sensor on the back and an 8-megapixel (f/2.2) front shooter for selfies. It keeps running on Android Oreo 8.0 out of the case and is squeezed by a 3000mAh battery, which underpins turbocharging.

TWRP Recovery on the Motorola Moto G6 will enable you to introduce custom ROMs, Custom Kernels, and furthermore empowered you to effortlessly root your gadget. While there are numerous different courses by which you can root an Android gadget, utilizing Magisk to root Android is the most ideal route starting at now. Furthermore, for that TWRP is compulsory! Read ahead to know how to install TWRP on the Moto G6 and after that how to root it using Magisk.

Disclaimer: You will need to unlock the bootloader of your phone for rooting. If your device is in warranty period, rooting may void your device warranty. Be sure to have a proper backup of your phone data if anything wrong. We cannot hold any responsibility in case of anything unexpected happens to your device.

How to Root Moto G6 Plus

Root your Moto G6 Plus phone using the patched boot image file linked below. The file is a custom boot image file for Moto G6 Plus (only) codenamed EVERT.

  • First of all, make sure you have the software version OPW27.113-45 installed (please don’t try this on any other device)
  • Unlock the bootloader of your Moto G6 Plus
  • Make sure you have latest ADB and Fastboot tool installed on your Mac/Windows
  • Enable USB Debugging in Developer Options.

Downloads

Guide to root Moto G6 Plus

  1. Connect your Moto G6 Plus to the PC with a USB cable.
    1. Hope you placed all downloaded files into a new folder for easy reference. Next, you have to run the Command Window in the folder where your download items are placed.
    2. For that, go to that folder, and then type cmd in the address bar and hit the enter key. A command window will open up, and its location will be that folder.
    3. Now we need to verify whether ADB for your phone is working fine, for that type the below command and hit the enter key to run it (you should get a random serial number).
adb devices
  • If you flashed with a permission dialogue on your device to “Allow USB debugging”, tap OK.
  • Boot your device into fastboot mode (also called bootloader mode) by running the command below:
adb reboot bootloader

In fastboot mode, flash the patched boot image file you downloaded by running the command below. This will install the modified boot image, which would install root access.

fastboot flash boot patched_boot.img

Once the process is complete, restart the device using the following command:

fastboot reboot
  1. Once your device boots, go ahead and download the Magisk Manager APK on your device.
  2. Install the Magisk Manager app.
  3. Open the Magisk manager app, and install Magisk as shown in the screenshot right below.magisk manager installWith the Magisk app open, you can simply hit the Install button, select the Direct Install method and have root access on your Moto G6 Plus up and running.

Now you have successfully rooted your Moto G6 Plus smartphone you can share any issues you faced while following the guide.

How to root Moto G6 Play

Requirements

Downloads

Download these files before moving onto the step by step guide.

Store these files in the same folder where you have stored the fastboot tools.

Initial Setup

  1. Connect your Moto G6 Play to the PC with a USB cable.
  2. Copy the Magisk file (Magisk-v16.4.zip) to your device.
  3. Hope you placed all downloaded files into a new folder for easy reference. Next, you have to run the Command Window in the folder where your download items are placed.
  4. For that, go to that folder, and then type cmd in the address bar and hit the enter key. A command window will open up, and its location will be that folder.
  5. Now we need to verify whether ADB for your phone is working fine, for that type the below command and hit the enter key to run it (you should get a random serial number).
adb devices

Steps To Root Motorola Moto G6 And Install TWRP

Step 1: Boot your device into fastboot mode (also called bootloader mode) by running the command below:

Type the following command in the command window and press enter:

adb reboot bootloader

Step 2: Install the DM Verity disabler

fastboot flash boot <filename>.img

Replace the <filename> with the filename you downloaded from Downloads. section.

Step 3: Let’s boot into the TWRP recovery by running the command below:

fastboot boot moto-g6-play-jeter-patched-twrp.img

Step 4: You need to Mount the vendor partition and make it re-writable. For that type the command below:

adb shell mount -o,rw /dev/block/platform/soc/7824900.sdhci/by-name/vendor /vendor

Step 5: Install the patched boot image file by running the command below:

adb push fstab.qcom /vendor/etc/fstab.qcom

Step 6: Now, Factory Reset your device. This will wipe everything on your device. Select Wipe from the TWRP recovery home screen and confirm it by swiping action at the bottom.

Step 7: Flash Magisk. From home screen select Install then browse for the file Magisk-v16.4.zip file and swipe to confirm.

Step 8: Reboot device. Tap on Reboot System button.

While your device restarts, you might see N/A in the top corner for a few seconds. Don’t worry it will disappear and you will soon see the Motorola’s boot screen and then welcome screen.

After the boot completes, open the Magisk Manager App and verify the root access. You may also try Root Checker App to verify the root access.

Troubleshoot Issues

The guide above offers easy and tricky root guide for Moto G6 users. It is the most adaptable guide found on internet recent times. There may be a possibility that everything doesn’t go alright and your device may stick into boot loop. If it occurs you will need to flash the stock recovery again.

You can download the stock recovery image for your device’s model no here – download stock recovery

Install it using the command below.

  • Put the device in fastboot mode.
  • Run below command to install the stock boot image file:
fastboot flash boot <filename>.img

Replace the <filename> with the name of the stock boot image file

  • Restart device:
fastboot reboot

Recommended: How to install Magisk Manager for Android phones

Howdy! You just successfully rooted your Moto G6 and installed TWRP.

This is the easiest way to root and install TWRP on Moto G6 Play and Moto G6 Plus. I hope this article works for youLet us discuss your experience trying out the methods mentioned in this article in the comments section down below. In case you find anything serious missing in this article help us by commenting below.

source – kwiksilver

Leave a Comment