S7 Active Firmware

Samsung Galaxy S7 Active Firmware

Samsung Galaxy S7 Active Firmware Download. In this post, we have managed to share the stock ROM for Samsung Galaxy S7 Active smartphone. You will be able to download firmware using the links provided below and also the guide for flashing firmware to your Samsung Galaxy S7 Active.

We use a tool called ‘Odin’ for flashing firmware to Samsung Galaxy devices. The Odin tool was officially developed by Samsung Labs and now it’s available to every developer and we can also use this tool for officially flashing Samsung ROM. Download Galaxy S7 Active firmware from below and flash using Odin. Install Samsung Galaxy S7 Active Firmware below.

Note: If you find any new stock firmware that you want to be added to this list please comment below or contact me.

Trending posts:

From below, you can download the stock firmware for your device. Please make sure that you are downloading the correct build for your phone. You can either seek help from us or google.

[su_note note_color=”#ffa473″ text_color=”#ffffff” radius=”5″]Check your device model number from Settings > About device, then download the specific firmware for your device.[/su_note]

SM-G891A

  • Android Version: 8.0 Oreo
  • Size: 2.4 G

G891AUCS5CSB1_ATT5CSB1.zip

[su_note note_color=”#ffd2d2″ text_color=”#000000″ radius=”5″]

If Odin fails to flash the firmware try this:

Load everything in Odin and put PIT file:
https://drive.google.com/file/d/1ndL…RSwZX5kQm/view

Tick F.reset Time, don’t tick the “auto-reboot option” and click Start
Once the flashing is done, remove the cable from your device. Boot into recovery via volume up + home + power button and chose wipe cache and data reset
If it fails again repeat the same steps with Patched Odin: https://androidfilehost.com/?fid=5862345805528067949

[/su_note]


How to Flash Firmware on Samsung Galaxy S7 Active

[su_highlight background=”#eaeaea”]

  • Download and extract/unzip the firmware file
  • Download and extract Odin v3.13.1 ZIP file
  • Open Odin v3.13.1 software
  • Reboot the device in Download Mode (press and hold Home + Power + Volume Down)
  • Connect device and wait for “ID: COM” to turn blue in Odin
  • Add the downloaded firmware file to AP/DPA
  • Make sure “Re-Partition” is NOT ticked
  • Click the “Start” button to begin the installation process
  • For detailed instructions and troubleshooting, click here

[/su_highlight]

Related threads:

Leave a Reply

Your email address will not be published. Required fields are marked *