Galaxy J7 Max Firmware

Samsung Galaxy J7 Max Firmware G615F

Samsung Galaxy J7 Max firmware Download. In this post, we have managed to share a few quality links of Samsung Galaxy J7 max Stock Firmware. You will able to download stock firmware with the link provided below.

Also read: Sony Xperia XZ Premium Firmware G8141, G8142 [Latest : Android 8.0 Oreo]

You can also download custom ROMs or recoveries on this website. To install any ROM other than stock, you have to root your Galaxy J7 Max and should have custom recoveries like CWM (clockwork mode) or TWRP. You can have your phone in factory reset condition by flashing the stock firmware. Below I will share the links for download the firmware for Galaxy J7 Max.

Samsung Galaxy J7 Max is released in 2017, June. It comes with a 5.7 inch full HD display resolution with 386 PPI. Galaxy J7 Max runs Android 7.0 Nougat which is upgradable to Android 8.1 Oreo. Galaxy J7 Max is powered by an Octa-core processor and Mediatek MT6757 Helio P20 chipset coupled with 4GB RAM and 32GB internal storage. The phone uses a Non-removable Li-Ion 3300 mAh battery and weighs approx 179g.

Trending posts:

Samsung Galaxy J7 Max Firmware

From below, you can download the stock firmware for your device. Please make sure that you are downloading the correct build for your phone. You can either seek help from us or google.

[su_note note_color=”#ffb37c” text_color=”#ffffff” radius=”5″]Check your device model number from Settings > About device, then download the specific firmware for your device.[/su_note]


Samsung Galaxy J7 Max G615F / India

SM-G615F_G615FXXU2BRL3_G615FODD2BRL3_INS_8.1_5Files.rar / Mirror – Latest May 2018

Nougat 7.0 –

How to Flash Firmware on Samsung Devices

[su_highlight background=”#eaeaea”]

  • Download and extract/unzip the firmware file
  • Download and extract Odin v3.13.1 ZIP file
  • Open Odin v3.13.1 software
  • Reboot the device in Download Mode (press and hold Home + Power + Volume Down)
  • Connect device and wait for “ID: COM” to turn blue in Odin
  • Add the downloaded firmware file to AP/DPA
  • Make sure “Re-Partition” is NOT ticked
  • Click the “Start” button to begin the installation process
  • For detailed instructions and troubleshooting, click here


Related threads:

Leave a Reply

Your email address will not be published. Required fields are marked *