Samsung Galaxy S9 Plus Firmware G965F

Samsung Galaxy S9 Plus Firmware G965F

Samsung Galaxy S9 Plus Firmware Download. In this post, we are sharing links to download firmware for Galaxy S9+ G965F, G965U, G965W, G9650. We had shared firmware files for Samsung Galaxy S9 G960F phones earlier. Download S9+ firmware from below and flash it to your phone using step-by-step guides provided at the end of the article. Flash S9+ firmware file using the guide provided below in this post.

Also read: Enter Recovery Mode and Download Mode in Samsung Phones

To flash the file to your S9 Plus we need the famous Odin tool. Samsung Labs officially developed the Odin tool and now it’s available to every developer and we can also use this tool for officially flashing Samsung firmware. Download the S9 Plus firmware flash file and Odin tool from below and install it on your Laptop/PC to flash firmware to your phone.

Samsung Galaxy S9+ is released on 2018 February which features a 6.2-inch display with a 1440 x 2960 pixels, 18.5:9 ratio resolution. The phone is out with Android 8.0 Oreo installed which is upgradable to Android 9.0 Pie. The phone is powered with 2.7 GHz Octa-core Qualcomm SDM845 Snapdragon 845 processor coupled with 6 GB of RAM and available in 64/128/256 GB storage options. The device comes with Non-removable Li-Ion 3500 mAh battery and weighs approx 189 gram.

Popular posts:

S9 Plus Firmware Download

From below, you can download the stock firmware for your Galaxy S9 phones. Please make sure that you are downloading the correct firmware build for your phone. You can either seek help from us or google.

Check your device model number from Settings > About device, then download the specific firmware for your device.


Samsung Galaxy G9650 Firmware / Android 8.0 Oreo


Samsung Galaxy G965F Firmware / Android 9.0 Pie

Android 8.0 Oreo


Samsung Galaxy G960U Firmware / Android 9.0 Pie

Android 8.0 Oreo


Samsung Galaxy G960W Firmware / Android 9.0 Pie



How to Flash Firmware on Samsung Galaxy S9 Plus

  1. Download and extract/unzip the firmware file
  2. Download and extract Odin v3.13.1 ZIP file
  3. Open Odin v3.13.1 software
  4. Reboot the device in Download Mode (press and hold Home + Power + Volume Down)
  5. Connect device and wait for “ID: COM” to turn blue in Odin
  6. Add the downloaded firmware file to AP/DPA
  7. Make sure “Re-Partition” is NOT ticked
  8. Click the “Start” button to begin the installation process
  9. For detailed instructions and troubleshooting, click here

Related threads:

Leave a comment