Sony Xperia Miro Firmware ST23i

Sony Xperia Miro Firmware ST23i

We have shared Sony Xperia Miro Firmware links in this post. Xperia Miro got released in 2012 June with a 3.5-inches touchscreen display which is having 320 x 480 pixels and 165 PPI density. Xperia Miro is powered with 800 MHz Cortex-A5 processors and Qualcomm MSM8260 Snapdragon S1 chipset coupled with 512MB RAM. The Sony Xperia Miro runs on 4.0 Ice Cream Sandwich. We are sharing the latest version below.

Xperia Miro Firmware

Also read : How to Update Firmware on Xiaomi DevicesH

In this post, we are sharing Stock ROM / Firmware for Sony Xperia Miro ST23i. We will update the article if we found any custom ROMs for this phone.

See all the benefits for installing Firmware of your phone

Popular :

Note: If you find any new stock firmware that you want added to this list please comment below or contact me.

Download links provided below are from third-party websites and please note that techbiriyani.com is not hosted any ROMs in our website if any of the below links is dead pls inform me.

Also ReadDisable Driver Signature Verification In Windows 8, 8.1 & 10 for Installing Drivers

From below, you can download the latest firmware for your phone. Please make sure that you are downloading the correct build for your phone. You can either seek help from us or from google.

Check your device model number from Settings > About phone, then download the specific firmware for your device.

Xperia Miro Firmware [ST23i]

Android 4.0.4

ST23i_11.0.A.5.5_Generic.ftf


Android 4.0.4 | Vodafone

ST23i_11.0.A.5.8_Vodafone.ftf


How to Install Firmware file

Requirements

  • Firmware file for your device (.FTF)
  • Flashtool
  • USB cable

Flashing Guide

Make sure to Enable “USB debugging” and “Unknown sources” on your Sony Xperia device, click here for help.

Part 1

  1. Download and install the Flashtool package from official website.
  2. Now go to your installed directory (usually – ‘C:\Flashtool\drivers’) and install Flashtool drivers
  3. Tick the “Flashmode Drivers” and “Fastboot Drivers” to install (see below image)
xperia flashtool guide

Note: To install the Flashtool drivers for Windows 8/8.1/10, please click here.

Part 2

  1. Here we finished installing Flashtool now Open It.
  2. Click on the lightning bolt in the top left of Flashtool as highlighted below.
flashtool guide
flashtool install

Select, ‘Flashmode’ and click OK

You should already be in the source folder where the FTF firmware files are located. If not, navigate to: “C:\Users\[Your PC Name]\.flashTool\firmwaresIf you still not able to find the path check this too, C:\Flashtool\firmwares\now you should get it.

Select the firmware build version that you want to flash from the “Firmware” pane. Ensure the device variant is the same as the model number of your Sony Xperia device.

A clean install is the way to go

So tick all options under the “Wipe” pane. This will wipe all of your data though including your photos and videos, so please ensure you have these backed up somewhere else.

install ftf using flashtool

Leave all others unchanged

Click on “Flash“. Flashtool will then indicate that it is “preparing files for flashing”.

install firmware with flashtool

Sometimes, you may have to wait around 60 seconds for the pop-up below to appear. Once it does, make sure that the device is powered off and then hold the ‘volume down’ button and connect the usb cable. Once the pop-up disappears and flashing has started, you can let go of the ‘volume down’ button.

flashtool rom flash

Flashtool will then start flashing your Xperia device.

install ftf file

Once you see “Flashing finished” as indicated below, your Sony Xperia has been successfully flashed.

flashtool tutorial

Hurray 🙂 you have just installed stock firmware! Now disconnect your Xperia device and power on the handset.

It will take some time for the first boot so, don’t worry if it takes a while, this is to be expected.

Firmware Benefits

You can use the firmware for variety of purposes, which includes:

  • Fix your Sony Xperia Miro if it’s giving you force closes errors and restarts randomly.
  • Unbrick your Sony Xperia Miro firmware if it’s boot looping and stuck at logo when restarting.
  • Go Back to Stock on your Sony Xperia Miro firmware — helps when looking to sell the device, or fix installing OTA updates if broken.
  • Restore Sony Xperia Miro to factory state i.e original state when you bought.
  • Upgrade your Sony Xperia Miro to newer Android version.
  • Downgrade your Sony Xperia Miro to lower build no. at same Android version.
  • Unroot your Sony Xperia Miro.
  • Remove custom recovery like TWRP and CWM, if installed, on your Sony Xperia Miro.

To perform any of the above, simply install the firmware meant for your device, as per its model no. in Settings > About device.

Need help? Let us know if you need any help regarding this via comments below.

Related Firmwares

Leave a comment