How to use Xiaomi MI Flash Tool: In this post we have managed to share a brief tutorial on Flashing stock firmware on xiaomi devices using Mi Flash Tool. By using this tool you can Repair Damaged Xiaomi Phone. Means if your Xiaomi device is bricked or Stuck at Mi logo then this will help you for sure.
Also read: Xiaomi USB Drivers Download
As you know Xiaomi release their MIUI ROMs in the two format which is Recovery ROM & Fastboot ROM. We can install Recovery ROM Using Updater Application which is available in MIUI Interface. Another one is Fastboot ROM, To install this ROM We need a Unlocked Bootloader and need to flash it through Mi Flash tool which is developed by Xiaomi itself.
Requirements: Xiaomi Mi Flash Tool will only work on the Xiaomi Devices which is running on Qualcomm Chipset. It will not support the Xiaomi Devices which runs on Other Chipsets other than Qualcomm Chipset.
Disclaimer: Don’t point to us in case if anything goes wrong. Don’t worry! We are always there for you.
Use Xiaomi MI Flash Tool
Step 1: Download and extract the Xiaomi Mi Flash Tool on your computer. After extracting the Xiaomi Mi Flash Tool, you will be able to see the following files:
Step 2: Now, Run and install Xiaomi Mi Flash Tool on your computer.
Open the installer package and run the setup process and install it on your computer.
Step 3: Download and extract the Xiaomi Stock Firmware (fastboot files) on your computer.
After extracting the Xiaomi Firmware, you will be able to see the similar files:
Step 4: Install the Xiaomi USB Driver on your Computer
Now for the smooth function we need to install Xiaomi USB drivers on your computer. (you can also download the Xiaomi USB Driver separately).
Step 5: Turn Off your Xiaomi Device.
Turn off your device by press and hold on power button
Step 6: Boot into Fastboot Mode
Now, You need to boot your Xiaomi Device into the Download Mode (fastboot mode). To boot into the download mode: Press and Hold Power + Volume Down button for 6-8 seconds.
Step 7: Once you have booted into the Download Mode, you will be able to see the following screen on your device:
Step 8: Now, Connect your Xiaomi Device to the Computer using the USB cable.
Step 8: Now, Open Xiaomi Mi Flash Tool from Start Menu.
Step 9: Once Xiaomi Mi Flash Tool is launched you will be able to see the following screen:
Step 10: Now, Click on the Select Button and locate the Firmware Folder.
Step 11: Now, Click on Flash Button to begin the Flashing Process.
Step 12: Once flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.
Notes to Remember:
[*] Compatibility: You can follow the above tutorial to flash stock firmware on almost all the Xiaomi Devices which are running on Qualcomm Chipset.
[*] USB Drivers: USB Drivers should be installed on your phones for the proper working of Xiaomi devices.
[*] Credits: Xiaomi Flash Tool is created by Xiaomi Mobility INC. So, full credits goes to them for sharing the Flash Tool for free.